prince_waiting
05-18 12:48 PM
Quotas are exactly the reason I cannot go back to India ever...I absolutely hate them....There is already classification under EB category....BTW I have a MS in EE from Auburn University....Best bet for us is lost visa recapture.....
wallpaper Derrick Rose 2011 NBA MVP
octoberbloom
12-28 11:39 AM
Omm,
I dont think you need to worry much since you might have just started your GC process and you have not filed your 485 yet. If I am in your situation, I will definitely go for it if its a real good job and if thats what I have been waiting for. May be you can restart the whole GC process.
Nothing is certain in the GC process. Find a right job and then start your GC. That ways even if you are stuck for several years, you dont need to go find another job.
n2b,
I hav seen many people in the forums getting RFE after invoking AC21. You know how USCIS works, right?? If they ever keep track of what they are doing and if they have a definite process in place, neither there will be any retrogression nor any of these forums. Be prepared for RFE if you are invoking AC21. Though you can survive that, imagine the period between receiving the RFE and responding to it. What if that happens in your 5th or 6th year of wait?? I pray that your wait is not that long.
Thanks
I dont think you need to worry much since you might have just started your GC process and you have not filed your 485 yet. If I am in your situation, I will definitely go for it if its a real good job and if thats what I have been waiting for. May be you can restart the whole GC process.
Nothing is certain in the GC process. Find a right job and then start your GC. That ways even if you are stuck for several years, you dont need to go find another job.
n2b,
I hav seen many people in the forums getting RFE after invoking AC21. You know how USCIS works, right?? If they ever keep track of what they are doing and if they have a definite process in place, neither there will be any retrogression nor any of these forums. Be prepared for RFE if you are invoking AC21. Though you can survive that, imagine the period between receiving the RFE and responding to it. What if that happens in your 5th or 6th year of wait?? I pray that your wait is not that long.
Thanks
tcsonly
01-04 10:57 AM
I think all 3 of them (Husband & 2 wives) should apply for their own H1B's and make it here and then apply for separate GC's.
2011 Chicago-ulls-1-derrick-rose-
immilaw
09-14 03:30 PM
I have several friends who were waiting for GC desparately and they thought it was the final destination. They had many reasons why to get GC and once they get, they will be free and can do / will do everything possible. But, once they got it, they settled in a permanent job. Without GC, they were working for the same client with even more pay and life was good if not better.
I was thinking the same way; because I am no different.
Oflate, I realised, I am un-necessarily worried about something which is not in my control. I realised that I am well paid, with this pay even the benefits I am not getting are compensated. Why am I worried? Should I be after GC in order to get peace of mind? I started looking it little differently. I am in this country to earn more money and live comfortably. I am already enjoying what I wanted. Then, why am I worried still? May be it is in human nature to always look for something which is not in the hands.
I still need GC for other things like Children education and get some other benefits (our education / starting business etc). I agree, but there is lot of time for that in my case. There are several people who are in the same state as me if not all. Everyone's needs are different.
I thought I will just share my ideas so that atleast some of the people will be happier.
Well said.
I was thinking the same way; because I am no different.
Oflate, I realised, I am un-necessarily worried about something which is not in my control. I realised that I am well paid, with this pay even the benefits I am not getting are compensated. Why am I worried? Should I be after GC in order to get peace of mind? I started looking it little differently. I am in this country to earn more money and live comfortably. I am already enjoying what I wanted. Then, why am I worried still? May be it is in human nature to always look for something which is not in the hands.
I still need GC for other things like Children education and get some other benefits (our education / starting business etc). I agree, but there is lot of time for that in my case. There are several people who are in the same state as me if not all. Everyone's needs are different.
I thought I will just share my ideas so that atleast some of the people will be happier.
Well said.
more...
tonyHK12
10-28 12:40 PM
You are one of the Proof. YOu need that... finally. See How you blabber for yourself.
Well I can't keep arguing with some m*r*n who keeps making false statements with no facts or statistics to back it up. I assume anything you say is likely false.
Well I can't keep arguing with some m*r*n who keeps making false statements with no facts or statistics to back it up. I assume anything you say is likely false.
kawosa
12-25 09:42 AM
My PD is years after you folks.. just wanted to wish you good luck!
Calling all EB3 INDIA applicants with a PD before October 1, 2001.
Friends we have been current since November 1st of this year. Many of us still have not heard anything about our cases. If you have this PD you have already been waiting over 7 yrs. What should we do to get USCIS's attention to look at our cases. It seems service requests are useless. They send the same old letter to everyone and thesere is no action. Whats our best options. Lets gather and look at ideas on what we can do. We know USCIS is so random.
Friends this is very imp for us. We have already suffered the most and are the most behind in dates compared to any other Category and country. We waited in pain and silence for years for our PD to become current. Now it finally is but still we see no action. Guys speak up lets try to do all we can. In this economy last thing we need is a waste of our 7 yrs of waiting and our files falling through some crack because of a random USCIS process.
Any thoughts, ideas ? whats worked for others and whats not. Will we get our green cards while we are still alive ????????
Calling all EB3 INDIA applicants with a PD before October 1, 2001.
Friends we have been current since November 1st of this year. Many of us still have not heard anything about our cases. If you have this PD you have already been waiting over 7 yrs. What should we do to get USCIS's attention to look at our cases. It seems service requests are useless. They send the same old letter to everyone and thesere is no action. Whats our best options. Lets gather and look at ideas on what we can do. We know USCIS is so random.
Friends this is very imp for us. We have already suffered the most and are the most behind in dates compared to any other Category and country. We waited in pain and silence for years for our PD to become current. Now it finally is but still we see no action. Guys speak up lets try to do all we can. In this economy last thing we need is a waste of our 7 yrs of waiting and our files falling through some crack because of a random USCIS process.
Any thoughts, ideas ? whats worked for others and whats not. Will we get our green cards while we are still alive ????????
more...
perm2gc
05-22 04:14 PM
Very sad to see this coming from the Core Member...Are we losing hope here, is that the game plan are we looking after putting tremondous effort for all these years?
Reality is always hard to take :D
Reality is always hard to take :D
2010 Derrick Rose: 2010-11 MVP?
eilsoe
02-03 06:17 PM
Anybody noticed the shadows on my entry?
I even have shadows on the flowers! :P
the boring days at work/school is gold in a pixel battle :smirk:
I even have shadows on the flowers! :P
the boring days at work/school is gold in a pixel battle :smirk:
more...
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
hair The Chicago Bulls#39; Derrick
edaltsis
08-08 10:03 AM
Same thing happened with one of my friends. He went to India immediately got married and brought his wife to US, the GC status would not update at the port of entry system that quick so he took a chance. You can give a try to schedule an appointment at the Chennai embassy for dependent visa (through your H1B). My friend spoke with a reputed law firm (I dont want to mention the name here but you all know 'her') who advised this and he got lucky.
As the priority dates are current you can apply for 485 for your spouse. Good Luck!
As the priority dates are current you can apply for 485 for your spouse. Good Luck!
more...
gsc999
09-05 11:00 PM
I am taking Jetblue from Oakland to Dulles Airport in DC reaching on Sunday (09/16)morning
I will be staying at http://hotel-harrington.com/aboutus.htm
A couple other folks from California will be staying at this Hotel. if you want we may be able to get a group discount.
I will be staying at http://hotel-harrington.com/aboutus.htm
A couple other folks from California will be staying at this Hotel. if you want we may be able to get a group discount.
hot Derrick Rose
unitednations
03-11 03:43 PM
I remember seeing Wipro, Satyam & Infosys reply to Durbin/Graasley. They were published in economictimes.
"non answer" meant they didn't answer his questions but rather gave some vague reply of how h-1 was good for usa.
If I was on the receivng end of that response; I would have thought that these guys are playing with me and by not answering the quesitons; then they are obviously trying to hide something. Therefore, I will attack them in another way to make them conform to the behaviour I want.
"non answer" meant they didn't answer his questions but rather gave some vague reply of how h-1 was good for usa.
If I was on the receivng end of that response; I would have thought that these guys are playing with me and by not answering the quesitons; then they are obviously trying to hide something. Therefore, I will attack them in another way to make them conform to the behaviour I want.
more...
house Derrick Rose Chicago Bulls
sweet23guyin
02-12 04:59 PM
Hi all,
... did not inform him while leaving his company and joined another job...
No matter how bad an employer is, one should inform before quiting...atleast one day in advance!
Bring IRS in to picture, let them deal these kind of cases...U should be OK in getting W2
Don't worry about losses and cases, it will cost him more if he gos to court.
... did not inform him while leaving his company and joined another job...
No matter how bad an employer is, one should inform before quiting...atleast one day in advance!
Bring IRS in to picture, let them deal these kind of cases...U should be OK in getting W2
Don't worry about losses and cases, it will cost him more if he gos to court.
tattoo 2010 Derrick Rose (Photo Credit: derrick rose bulls playoffs.
acecupid
05-31 02:06 PM
Voted and posted a comment as well.:cool:
more...
pictures derrick rose bulls wallpaper.
mybid2003
11-18 04:28 PM
I am still waiting for my FP. :-(
dresses chicago ulls 2011 wallpaper.
clockwork
08-08 12:15 AM
Even if I back date my marriage (as advised) , How can I get my future wife to USA?. I cannot get her on depend status as my H1-B (I believe) got canceled on approval of GC.
Issues I see,
1. The back date of marriage must match to my stay at India.
2. I did not visit India in the last one year.
3. I applied my I-485 in the August 2008 time. So (I must mention my marriage and dependents in the application). Which I did not . So this does not work.
See the troubles I have now.
P.S: I did not want to cheat USA Immigration Dept. Not a good practice
Let me know if there are any guanine ways.
I dont have any better idea than what other ppl are suggesting.....But
If i were in your place, i would have arranged register marriage in july itself :) after seeing the august visa bulleting then apply for spouse I-485 on the 1st day of August 08. This solves 2 problems, the one currently u r facing and the other chance of applying I-485 for your spouse. Later, you cud have followed ritual marriage as arranged by your parents....
Best of luck.
Issues I see,
1. The back date of marriage must match to my stay at India.
2. I did not visit India in the last one year.
3. I applied my I-485 in the August 2008 time. So (I must mention my marriage and dependents in the application). Which I did not . So this does not work.
See the troubles I have now.
P.S: I did not want to cheat USA Immigration Dept. Not a good practice
Let me know if there are any guanine ways.
I dont have any better idea than what other ppl are suggesting.....But
If i were in your place, i would have arranged register marriage in july itself :) after seeing the august visa bulleting then apply for spouse I-485 on the 1st day of August 08. This solves 2 problems, the one currently u r facing and the other chance of applying I-485 for your spouse. Later, you cud have followed ritual marriage as arranged by your parents....
Best of luck.
more...
makeup derrick-rose-mvp-2011 Bulls
GCOrNoGC
07-19 05:11 PM
Sorry for my ignorance, but can someone tell me how I can start a new thread. I seem to have a question that probably has not been asked before. Thanks!:confused:
girlfriend derrick rose ulls 2011.
webm
06-05 12:44 PM
Such thread are not created on this site. Even is not the place, as most applicants do not register with .
It is also possible that very few visa numbers were available during May for EB-3 India.
I agree...but sometimes few frequent users share that info here..and i dont see anything for May atleast..
It is also possible that very few visa numbers were available during May for EB-3 India.
I agree...but sometimes few frequent users share that info here..and i dont see anything for May atleast..
hairstyles 32.99. NBA 2011 All Star East
kaisersose
07-19 10:05 AM
You are cutting it too close. If her flight is delayed, you are at risk.
My suggestion is to have her get here sooner to give you folks enough time to get things done and to allow room for unexpected delays.
My suggestion is to have her get here sooner to give you folks enough time to get things done and to allow room for unexpected delays.
ronhira
07-08 07:43 PM
good one Ron Hira..this guy for sure is an odd ball leaching around here trying to create a controversy...
eb3retro, i think u & i need not as much worry about oscarzumaran et al..... as we should worry about those who remain silent..... day after day....
eb3retro, i think u & i need not as much worry about oscarzumaran et al..... as we should worry about those who remain silent..... day after day....
willgetgc2005
03-16 07:58 PM
RAgz4u and other core IV member,
One suggestion, does senator Kennedy know about employment based immigration issues. Have we (IV) contacted him or his office to make sure he is aware of our issue? He has been and will remain a key figure and influencer in this. Just a suggestion that we keep his office abreast of the issues.
Thanks
Does that means that the existing backlog will be cleared fast?
Specter agreed this morning with Kennedy's approach, provided that these illegal immigrants would not be able to start legalization proceedings until the backlog of 3 million people now waiting in countries around the world for their chance to come to the United States legally get their green cards.
Any comments or thoughts on this is highly appreciated.
Thanks
nlssubbu
__________________________________________________ ______________
India - EB3 - Priority Date 07/16/2001
I-140 Applied 07/30/2004 - RFE (Labor Substitue) - 06/27/2005 Replied 10/19/2005 Approved 11/02/2005
I-485 Applied 12/01/2004 - FP done on 1/8/2005 - Approval ??
1st EAD - Applied 12/01/2004 - RFE (Color photo Myself & Daughter) - 2/7/05 Replied 2/18/05 Approved 03/02/05
1st AP - Applied 12/01/2004 - RFE (Color Photo Myself & Daughter) - 2/7/05 Replied 2/18/05 Approved 03/02/05
2nd EAD - Applied 11/02/2005 - Approved 12/02/2005
2nd AP - Applied 11/02/2005 - Approved 12/20/2005
One suggestion, does senator Kennedy know about employment based immigration issues. Have we (IV) contacted him or his office to make sure he is aware of our issue? He has been and will remain a key figure and influencer in this. Just a suggestion that we keep his office abreast of the issues.
Thanks
Does that means that the existing backlog will be cleared fast?
Specter agreed this morning with Kennedy's approach, provided that these illegal immigrants would not be able to start legalization proceedings until the backlog of 3 million people now waiting in countries around the world for their chance to come to the United States legally get their green cards.
Any comments or thoughts on this is highly appreciated.
Thanks
nlssubbu
__________________________________________________ ______________
India - EB3 - Priority Date 07/16/2001
I-140 Applied 07/30/2004 - RFE (Labor Substitue) - 06/27/2005 Replied 10/19/2005 Approved 11/02/2005
I-485 Applied 12/01/2004 - FP done on 1/8/2005 - Approval ??
1st EAD - Applied 12/01/2004 - RFE (Color photo Myself & Daughter) - 2/7/05 Replied 2/18/05 Approved 03/02/05
1st AP - Applied 12/01/2004 - RFE (Color Photo Myself & Daughter) - 2/7/05 Replied 2/18/05 Approved 03/02/05
2nd EAD - Applied 11/02/2005 - Approved 12/02/2005
2nd AP - Applied 11/02/2005 - Approved 12/20/2005